ARDEX

ARDEX

ARDEX

  • ARDEX A 35 Ultra Rapid Drying Cement for Internal Screeds Grey 25kg ARDEX A 35 Ultra Rapid Drying Cement for Internal Screeds Grey 25kg

    ARDEX A 35 Ultra Rapid Drying Cement for Internal Screeds Grey 25kg

    ARDEX

    £40.45
    ARDEX A 35 produces ultra-rapid drying floor screed which can be walked on after just 3 hours and floorcoverings installed in as little as 4 hours, regardless of thickness. Use ARDEX A 35 for bonded,...
    AA35G25
    SKU:
    AA35G25
    Working Time at 20°C:
    60 minutes (approx.)
    Walkability at 20°C:
    3 hours (approx.)
    Compressive Strength 1:4 Mix:
    After 1 day 25.0 N/mm², After 3 days 32.0 N/mm², After 28 days 40.0 N/mm²
    Compressive Strength 1:5 Mix:
    After 1 day 23.0 N/mm², After 3 days 28.0 N/mm², After 28 days 32.0 N/mm²
    Tensile Bending Strength 1:4 Mix:
    After 1 day 5.0 N/mm², After 3 days 6.5 N/mm², After 28 days 7.0 N/mm²
    Tensile Bending Strength 1:5 Mix:
    After 1 day 4.0 N/mm², After 3 days 5.0 N/mm², After 28 days 6.0 N/mm²
    Soundness (BRE Screed Test):
    Normally after 6 hours
    Technical Datasheet:
      Download
    Health & Safety Datasheet:
      Download
    Declaration Of Performance:
      Download
    Environmental Product Declaration:
      Download
    Emicode® Certificate:
      Download
    £40.45
  • ARDEX A 46 Multi-Purpose Repair Mortar Grey 11kg ARDEX A 46 Multi-Purpose Repair Mortar Grey 11kg

    ARDEX A 46 Multi-Purpose Repair Mortar Grey 11kg

    ARDEX

    £23.72
    ARDEX A 46 is a rapid repair, slump free concrete repair mortar which is ideal for external and internal repairs. The polymer modified mortar sets and hardens rapidly to give a repair of high...
    AA46G11
    SKU:
    AA46G11
    Working Time:
    15 minutes (approx.)
    Compressive Strength:
    After 1 day 10.0 N/mm², After 7 days 15.0 N/mm², After 28 days 20.0 N/mm²
    Tensile Bending Strength:
    After 1 day 2.0 N/mm², After 7 days 4.0 N/mm², After 28 days 6.0 N/mm²
    Freeze thaw and salt resistant:
    Yes
    Suitable for underfloor heating:
    Yes
    Technical Datasheet:
      Download
    Health & Safety Datasheet:
      Download
    Declaration Of Performance:
      Download
    Environmental Product Declaration:
      Download
    Emicode® Certificate:
      Download
    £23.72
  • ARDEX AF 200 Plus Uncoupling Matting Adhesive 14kg

    ARDEX AF 200 Plus Uncoupling Matting Adhesive 14kg

    ARDEX

    £67.99
    ARDEX AF 200 PLUS minimises the time required to install uncoupling matting to timber, concrete and sand/cement screed subfloors, allowing tiling to commence immediately after the matting is...
    AAF2P14
    SKU:
    AAF2P14
    Suitable for External Use or Wet Areas:
    No
    Suitable for Use with Under Tile Heating:
    Yes
    Fix Matting Time:
    5-10 minutes, or within 1 hour
    Coverage:
    approx. 45m² per 14kg tub using a B1 or 2mm x 6mm v-notch trowel
    Technical Datasheet:
      Download
    Health and Safety Datasheet:
      Download
    Declaration of Performance:
      Download
    Emicode® Certificate:
      Download
    Application Guide:
      Download
    £67.99
  • ARDEX AF 200 Plus Uncoupling Matting Adhesive 6kg

    ARDEX AF 200 Plus Uncoupling Matting Adhesive 6kg

    ARDEX

    £28.08
    ARDEX AF 200 PLUS minimises the time required to install uncoupling matting to timber, concrete and sand/cement screed subfloors, allowing tiling to commence immediately after the matting is...
    AAF2P6
    SKU:
    AAF2P6
    Suitable for External Use or Wet Areas:
    No
    Suitable for Use with Under Tile Heating:
    Yes
    Fix Matting Time:
    5-10 minutes, or within 1 hour
    Coverage:
    approx. 45m² per 14kg tub using a B1 or 2mm x 6mm v-notch trowel
    Technical Datasheet:
      Download
    Health and Safety Datasheet:
      Download
    Declaration of Performance:
      Download
    Emicode® Certificate:
      Download
    Application Guide:
      Download
    £28.08
  • ARDEX Arditex CL Part A (Powder) 20kg + Part B (Latex) 4.5kg ARDEX Arditex CL Part A (Powder) 20kg + Part B (Latex) 4.5kg

    ARDEX Arditex CL Part A (Powder) 20kg + Part B (Latex) 4.5kg

    ARDEX

    £18.26
    ARDITEX CL is a two part levelling and smoothing compound with excellent flow and application properties. For smoothing and levelling most common internal subfloors such as concrete, cement/sand and...
    AACLA20 + AACLB4.5
    SKU:
    AACLA20 + AACLB4.5
    Sizes:
    Part A (Powder) 20kg, Part B (Latex) 4.5kg
    Coverage:
    Approximately 5m² at 2-3mm thick per unit
    Compressive Strength:
    Greater than 20N/mm² at 28 days
    Tensile Bedding Strength:
    Flexural strength greater than 8N/mm² at 28 days
    Suitable for Underfloor Heating:
    Yes
    Technical Datasheet:
      Download
    Health and Safety Datasheet (Powder):
      Download
    Health and Safety Datasheet (Liquid):
      Download
    Declaration of Performance:
      Download
    £18.26
  • ARDEX Arditex NA Part A (Powder) 20kg + Part B (Latex) 4.85kg

    ARDEX Arditex NA Part A (Powder) 20kg + Part B (Latex) 4.85kg

    ARDEX

    £31.12
    ARDITEX NA Levelling and Smoothing Compound saves you both time and money by removing the need for intensive preparation and priming. Its renowned versatility and advanced site tolerance reduces...
    AANAA20 + AANAB4.5
    SKU:
    AANAA20 + AANAB4.5
    Sizes:
    Part A (Powder) 20kg, Part B (Latex) 4.85kg
    Coverage:
    Approximately 5m² at 3mm thick per unit
    Compressive Strength:
    After 28 days approx. 16 N/mm²
    Flexural Strength:
    After 28 days approx. 5.5 N/mm²
    Indentation Resistance:
    24 Hours 15 N/mm², 7 days 25 N/mm² (Typically floorcoverings range between 0.5 – 6N/mm²)
    Approximate Application Coverage:
    2mm = 7m², 3mm = 5m², 5mm = 3m², 8mm* with ARDEX Aggregate = 3m², 10mm* with ARDEX Aggregate = 2.3m² (*For application thicknesses 8mm and above ARDEX Coarse aggregate will improve coverage.)
    Suitable for Underfloor Heating:
    Yes
    Technical Datasheet:
      Download
    Health and Safety Datasheet (Powder):
      Download
    Health and Safety Datasheet (Liquid):
      Download
    Declaration of Performance:
      Download
    Environmental Product Declaration:
      Download
    Arditex NA Brochure:
      Download
    LVT Subfloor Guide:
      Download
    £31.12
  • ARDEX Ardurapid A 45 Rapid Drying Internal Repair Mortar 11kg ARDEX Ardurapid A 45 Rapid Drying Internal Repair Mortar 11kg

    ARDEX Ardurapid A 45 Rapid Drying Internal Repair Mortar 11kg

    ARDEX

    £19.69
    ARDEX ARDURAPID A 45 is a rapid drying and hardening, slump free mortar for internal repairs. Receives finishes after 90 minutes regardless of thickness Slump free – ideal for vertical and...
    AA45G11
    SKU:
    AA45G11
    Initial Set (Vicat):
    approx. 15 mins at 20°C
    Final Set (Vicat):
    approx. 60 mins at 20°C
    Compressive Strength:
    After 1 day 17.0 N/mm², After 3 days 20.0 N/mm², After 28 days 30.0 N/mm²
    Tensile Bending Strength:
    After 1 day 4.0 N/mm², After 3 days 4.5 N/mm², After 28 days 6.5 N/mm²
    Ball Pressure Hardness (Brinell):
    After 1 day 55.0 N/mm², After 3 days 63.0 N/mm², After 28 days 80.0 N/mm²
    Technical Datasheet:
      Download
    Health & Safety Datasheet:
      Download
    Declaration Of Performance:
      Download
    Environmental Product Declaration:
      Download
    Emicode® Certificate:
      Download
    £19.69
  • ARDEX CA 20 P Multi-Purpose Construction Adhesive & Sealant 310ml ARDEX CA 20 P Multi-Purpose Construction Adhesive & Sealant 310ml

    ARDEX CA 20 P Multi-Purpose Construction Adhesive & Sealant 310ml

    ARDEX

    £8.39
    ARDEX CA 20 P is suitable for a wide range of site applications, as an adhesive and sealant, for general building maintenance on floors and walls in internal and external locations. Ideal...
    ACA20P
    SKU:
    ACA20P
    Skinning Time:
    7-10 minutes
    Curing Time:
    24 hours assuming on a porous surface
    Shrinkage:
    <1%
    Practical Expansion:
    25%
    Hardness Shore A:
    approx. 40
    Shear Adhesion Strength:
    2 N/mm²
    Tensile Adhesion Strength:
    1 N/mm²
    VOC:
    0 g/L
    Technical Datasheet:
      Download
    Health and Safety Datasheet:
      Download
    Emicode® Certificate:
      Download
    Product Flyer:
      Download
    £8.39
  • ARDEX DS 20 Uncoupling Mat 50m Roll ARDEX DS 20 Uncoupling Mat 50m Roll

    ARDEX DS 20 Uncoupling Mat 50m Roll

    ARDEX

    £345.58
    ARDEX DS 20 is an uncoupling mat ideal for installing tiles, slabs, natural stone and concrete pavers on floors with loads up to 2KN/m². It is a loose laid system that facilitates tiling without...
    ADS2050
    SKU:
    ADS2050
    Suitable for External Use or Wet Areas:
    No
    Suitable for Use with Under Tile Heating:
    Yes
    Coverage:
    50m² per roll
    Technical Datasheet:
      Download
    £345.58
  • ARDEX E 100 5kg

    ARDEX E 100 5kg

    ARDEX

    £54.50
    ARDEX E 100 improves the properties of screeding & rendering mortars, and can be mixed with ARDEX A 38 to produce a grouting slurry for bonded screeds in external locations and wet areas...
    AE1005
    SKU:
    AE1005
    Adhesion to Background:
    Cement slurries improved with ARDEX E 100 applied onto a clean, laitance free concrete surface will have a tensile adhesion strength in excess of 2.5N/mm² after 28 days.
    Coverage:
    Refer to product datasheet
    Technical Datasheet:
      Download
    Health and Safety Datasheet:
      Download
    Declaration of Performance:
      Download
    Environmental Product Declaration:
      Download
    Brochure:
      Download
    £54.50
  • ARDEX E 90 3.6kg

    ARDEX E 90 3.6kg

    ARDEX

    £36.00
    ARDEX E 90 is an admix for tile adhesives that produces a mortar which, when set and hardened, has high adhesive strength as well as elastic and water repellent properties. It is particularly...
    AE9036
    SKU:
    AE9036
    Suitable for External Use or Wet Areas:
    Yes, including swimming pools
    Suitable for Use with Under Tile Heating:
    Yes
    Coverage:
    3.6kg of ARDEX E 90 is sufficient for approximately 20kg of ARDEX S 16, 2kg of ARDEX E 90 is sufficient for approximately 22kg of ARDEX S 21
    Technical Datasheet:
      Download
    Health and Safety Datasheet:
      Download
    Declaration of Performance:
      Download
    Environmental Product Declaration:
      Download
    £36.00
  • ARDEX K 15 HB High Build Rapid Drying Smoothing Compound 25kg

    ARDEX K 15 HB High Build Rapid Drying Smoothing Compound 25kg

    ARDEX

    £29.93
    Apply from 5mm to 35mm in one application Rapid hardening – walkable in approximately 2 hours, even with thick applications Floorcoverings can be applied after 24 hours, regardless of...
    AK1525
    SKU:
    AK1525
    Working Time at 20°C:
    approx. 30 minutes
    Flow Life at 20°C:
    approx. 15 minutes
    Initial Set (Vicat):
    approx. 30 minutes
    Final Set (Vicat):
    approx. 2 hours
    Compressive Strength (DIN 1164):
    After 1 day 19.0 N/mm², After 7 days 27.0 N/mm², After 28 days 35.0 N/mm²
    Tensile Bending Strength (DIN 1164):
    After 1 day 4.5 N/mm², After 7 days 6.0 N/mm², After 28 days 8.0 N/mm²
    Suitable for Underfloor Heating:
    Yes
    Technical Datasheet:
      Download
    Health & Safety Datasheet:
      Download
    Declaration Of Performance:
      Download
    Environmental Product Declaration:
      Download
    £29.93
  • ARDEX K 15 NEW Rapid Drying Heavy Duty Self-Levelling Smoothing Compound 22kg ARDEX K 15 NEW Rapid Drying Heavy Duty Self-Levelling Smoothing Compound 22kg

    ARDEX K 15 NEW Rapid Drying Heavy Duty Self-Levelling Smoothing Compound 22kg

    ARDEX

    £32.06
    ARDEX K 15 is an advanced, Rapid Drying, Heavy Duty Self-Levelling Smoothing Compound. Due to the unique rapid drying properties, ARDEX K 15 can receive floorcoverings in as little as 4 hours...
    AK15N22
    SKU:
    AK15N22
    Working Time at 20°C:
    approx. 30 minutes
    Flow Life at 20°C:
    approx. 15 minutes
    Initial Set (Vicat):
    approx. 30 minutes
    Final Set (Vicat):
    approx. 2 hours
    Compressive Strength (EN196):
    After 1 day 19 N/mm², After 3 days 22 N/mm², After 7 days 28 N/mm², After 28 days 35 N/mm²
    Tensile Bending Strength (EN196):
    After 1 day 4.5 N/mm², After 3 days 5.8 N/mm², After 7 days 6.0 N/mm², After 28 days 9.0 N/mm²
    Suitable for Underfloor Heating:
    Yes
    Technical Datasheet:
      Download
    Health & Safety Datasheet:
      Download
    Declaration Of Performance:
      Download
    Environmental Product Declaration:
      Download
    Emicode® Certificate:
      Download
    £32.06
  • ARDEX K 301 Exterior Self-Levelling Concrete Resurfacing Compound 25kg ARDEX K 301 Exterior Self-Levelling Concrete Resurfacing Compound 25kg

    ARDEX K 301 Exterior Self-Levelling Concrete Resurfacing Compound 25kg

    ARDEX

    £37.39 - £1,602.00
    ARDEX K 301 is ideal for resurfacing exterior concrete areas including damaged drives, paths, patios and larger surface areas such as car parks and courtyards. Fast setting – walkable after...
    AK30125
    SKU:
    AK30125
    Bulk Density of Powder:
    approx. 1.37kg/litre
    Weight of Fresh Mortar:
    approx. 1.94kg/litre
    Initial Set (Vicat):
    approx. 40 minutes
    Final Set (Vicat):
    approx. 2 hours
    Compressive Strength:
    After 7 days 20.0 N/mm², After 28 days 28.0 N/mm²
    Tensile Bending Strength:
    After 28 days 6.5 N/mm²
    Overcoat Time for Industrial Coatings:
    Up to 5mm = 2 days, Up to 10mm = 5 days, Up to 20mm = 7 days
    Technical Datasheet:
      Download
    Health & Safety Datasheet:
      Download
    Declaration Of Performance:
      Download
    Environmental Product Declaration:
      Download
    Product Overview Sheet:
      Download
    £37.39 - £1,602.00
  • ARDEX K 39 Extended Workability and High Flow Levelling and Smoothing Compound 22kg ARDEX K 39 Extended Workability and High Flow Levelling and Smoothing Compound 22kg

    ARDEX K 39 Extended Workability and High Flow Levelling and Smoothing Compound 22kg

    ARDEX

    £25.40
    With its extended working time, fresh mixes of ARDEX K 39 can be easily smoothed into existing pre-applied material up to 40 minutes after application. This gives the installer more...
    AK3922
    SKU:
    AK3922
    Working Time at 20°C:
    approx. 40 minutes
    Flow Life at 20°C:
    approx. 25 minutes
    Compressive Strength:
    After 1 day 6.0 N/mm², After 7 days 22.0 N/mm², After 28 days 29.0 N/mm²
    Tensile Bedding Strength:
    After 1 day 2.0 N/mm², After 7 days 5.0 N/mm², After 28 days 8.0 N/mm²
    EMICODE:
    EC1+R (very low emission)
    Suitable for Underfloor Heating:
    Yes
    Technical Datasheet:
      Download
    Health & Safety Datasheet:
      Download
    Declaration Of Performance:
      Download
    Environmental Product Declaration:
      Download
    Emicode® Certificate:
      Download
    Product Postcard:
      Download
    Product Flyer:
      Download
    ARDEX LVT Subfloor Guide:
      Download
    £25.40