Akemi

Akemi Akepox 1005 is a two component filler with a very low viscosity. It has a hardening time of 24 hours (at 20ºC approximately) and only has a slight tendency to discolour. It is easy to...

Akemi Akepox 1009 is a two component filler with a very low viscosity. It has a hardening time of 48 hours (at 20ºC approximately). It is easy to colour, is free of solvents and is...

Akemi Akepox 2000 is a liquid, two component adhesive. It is easy to colour, as well as being solvent free and weather-resistant. It is used for laminating (sandwiching), filling fissures...

Akemi Akepox 2010 is a gel-like, two component construction adhesive, that is weather-resistant. It is used for fine bonding joints and for the bonding of natural and artificial stone, wood and...

Akemi Akepox 2030 is a creamy two component construction adhesive with a hardening time of approx 8-10 hours (20ºC). The product is workable and can be used for heavy duty use. It...

Akemi® Akepox 2030 - 3kg is a creamy two component construction adhesive with a hardening time of approx 8-10 hours (20ºC). The product is workable and can be used for...

Akemi® Akepox 3000 50ml is a weather resistant, two component anti-slip product.  It is used on anti-slip surfaces of natural stone, artificial stone or ceramics for stairs, in...

Akemi Akepox 5000 is a low viscosity, two component filler. It has only a slight tendency to discolour and is easy to colour. Free of solvents, weather resistant. For visible...

Akemi® Akepox 5010 is a gel-like two component construction adhesive. It only has a slight tendency to discolour, is ideal for colouring, is free of solvents and is weather resistant...

Akemi® Akepox 5010 is a gel-like two component construction adhesive. It only has a slight tendency to discolour, is ideal for colouring, is free of solvents and is weather resistant...

Akemi® Akepox 5010 is a gel-like two component construction adhesive. It only has a slight tendency to discolour, is ideal for colouring, is free of solvents and is weather resistant...

Akemi Akepox Plastic Applicator Gun includes plunger for: 37ml cartridges at 10:1; 50ml cartridges at 1:1; 50ml cartridges at 2:1. This gun works with both 37ml and 50ml Akepox cartridges.

Akemi Algae & Moss Remover Power 1 Litre is a fast-acting, slightly alkaline cleaner which is solvent free. It immediately and thoroughly removes natural layers and discolouration caused by...

Akemi Colour Bond is a pre-coloured, gel-like two component epoxyacrylate based adhesive in different colours, with high bonding power and a very fast surface drying and processing time. It is...

Akemi Colour Bond Mixing Nozzles for 250 ml and 490 ml cartridge. Mixing nozzle for squeezing the adhesive into the joint or crack. 10:1 mixing ratio